STG Aerospace

Emergency Exit Marking and
Cabin Lighting Systems

Bright ideas. Brilliant Solutions.

Visit Us Email us

STG Aerospace is the trusted partner to solve your lighting challenges. Our lighting systems are line-fit for most OEMs (including Airbus, Boeing, Embraer and Comac) and are operating on over 12,000 aircraft, with some 300 airlines worldwide.

Products

Emergency Floor Path Marking

saf-Tglo® Blue Glow

100% reliable
If saf-Tglo® is there, it works! Eliminates AOG with unlimited life, when installed and maintained as per product instructions

Self-charging
Just requires short charge via the cabin lighting during aircraft preparation, prior to the first flight of the day

Easy install
A simple ‘cut, seal, stick’ installation (1 hour install for typical single aisle)

Single multi-model STC
Regardless of aircraft type or width variant, it is all included under one STC pack

Customise your design
Widest CMF palette (including industry first red daylight), choice of finish, custom options to match carpet pattern, colour or incorporate airline branding

Product Specifications

Power requirements:	Non-electrical, self-powered system, charged by ambient lighting
Unlimited Lifespan:	No test coupon required meaning unlimited life span
Charging time:	5 to 45 minutes, depending on aircraft type and customer requirements*
Performance:	Up to 21 hours approved dark duration*
Flammability:	Conforms to FAR/CS 25.853 and RTCA/DO-160G
Durability:	Surpasses 20,000 cycle, 300lbs severe load galley cart test
Toxicity:	Non-toxic, BSS7239, ATS1000/ABD0031 REACH Compliant
Radioactivity:	Non-radioactive
Cleaning:	Warm water and soap or mild detergents recommended
Environmental:	All products approved to RTCA/DO-160G
Storage temperature:	-55ºC to +80ºC
Operation temperature:	-25ºC to +55ºC
UV stability:	MIL STD 810F
Fluids resistance:	Resistant to a wide range of drinks and cleaning fluids
Fungus resistance:	Fully resistant (non-nutrient materials)

* Please contact STG Aerospace regarding your particular requirements sales@stgaerospace.com

Signage

100% fail safe
Our photoluminescent signage is suitable as tritium and electrical replacements on both fixed-wing and rotorcraft, where signs must be visible at all stages of flight

Self-illuminated
Non-electrical, charged by ambient lighting. Clearly visible in the dark with long duration illumination

Unlimited lifespan
Maintenance free signage, with replacement upon condition

Automatic activation
No switch needed, just perform when needed. Suitable for a range of uses like progression signs, CS23 Exit Locators, operation instruction placards and window exit markers

Tailored to requirements
Customised signage options available to meet various cabin uses, including emergency medical & rescue, VIP and military uses

Product Specifications

Power requirements:	Non-electrical, self-illuminated, charged by ambient lighting
Unlimited Lifespan:	Maintenance free signage, with replacement upon condition
Charging time:	Example typical charge of 45 mins at 80lx or 2 mins at 350lx using green glow material dependant on aircraft type and customer requirements*
Performance:	Product meets:CS23.811(b) CS25.812(b)(i)(ii)CS29.811(d)
Flammability:	Conforms to FAR/CS and RTCA/DO-160G
Toxicity:	Non-toxic, BSS7239, ATS1000/ABD0031 REACH Compliant
Radioactivity:	Non-radioactive
Environmental:	All products approved to RTCA/DO-160G
Storage temperature:	-55ºC to +80ºC
Operation temperature:	-20ºC to +55ºC
UV stability:	MIL STD 810F

* Please contact STG Aerospace regarding your particular requirements sales@stgaerospace.com

Cabin Lighting

Plug, play, fly
Easy to install and operate – plug & play installation in just 6 hours

Reliable
MTBF in excess of 800,000 operating hours

Fleet harmonisation
Enhance the cabin ambience, no matter the age/type of aircraft, to the same or better quality standard lighting as brand-new aircraft

Customisation
Full colour, dynamic and configurable LED lighting solution. With 16.7 million colours, there is an option to meet every requirement

Certification
FAA, EASA Certified & NAA Validations

liTeMood Reading Light

Product Specifications

FAA / EASA:	EASA (Minor Change Approval or STC) & FAA (STC)
Power Saving:	50% reduction in power usage compared to incumbent system
Reliability:	MTBF in excess of 800,000 operating hours
Weight Reduction:	45 kg for A330 and up to 40kg on 757
Operating Voltage:	115V / 400 hz
Compatibility:	• Airbus – Works with classic and enhanced CIDS • Boeing – Fully compatible with all existing aircraft electrical systems, including Bruce Aerospace, Diehl & Page Aerospace

Meets Regulatory Charging Requirements FAA and EASA approved for the charging of saf-Tglo®

For full technical specifications please contact STG Aerospace.

Whatever your lighting requirements we have the right solution for you – from emergency exit (saf-Tglo®) to a range of cabin lighting solutions (liTeMood®) that compliment the cabin interior and enhance passenger experience.

Photoluminescent and electrical lighting technologies provide our two system offerings. In combination, this enables us to offer unique, optimised solutions as a single source provider for your total interior lighting requirements.

With full through life in-house capability (including design and certification), customer support is provided throughout the whole life cycle of our lighting products and systems. Which STG Aerospace lighting solution will work for you?

STG Aerospace

Emergency Exit Marking and Cabin Lighting Systems

Bright ideas. Brilliant Solutions.

Products

Emergency Floor Path Marking

saf-Tglo® Blue Glow

Product Specifications

Signage

Product Specifications

Cabin Lighting

liTeMood Reading Light

Product Specifications

Emergency Exit Marking and
Cabin Lighting Systems